About Me

Exploring Dent Pulling Procedures

Hey everyone, my name is Ty Baker. I would like to discuss the different ways auto body workers pull dents. The dent pulling process often makes damaged body panels look like new in an instant. Suction based dent pullers are most commonly used, especially on fiberglass panels. However, body repair experts have pullers that screw into or weld onto the damaged vehicle panels. From there, the pros carefully tug the material back into shape. I hope you will learn about this process to help you understand how your vehicle is repaired after a collision. Knowing how the experts approach the job will help you stay stress free throughout the procedure. Thank you for coming by my website about pulling dents out of automotive panels. Please come back soon.




Exploring Dent Pulling Procedures

Protecting Yoru Car From Rust Damage

by Jill Robinson

Rust can be a big problem for car owners. This is especially true if you live in an area with a lot of snow. When it comes to rust, you want to be proactive by watching for signs of rust so you can put a stop to it before it causes further damage to your vehicle. In order to keep your car as rust-free as possible, follow the tips in this article.

Protect areas with dents or scratches: Areas on your car where there are dents or scratches are going to be more susceptible to rust. You want to protect these areas by putting petroleum jelly on the scratch or dent if you plan on having it repaired soon. This will prevent rust from occurring in the meantime. If you aren't sure when you are going to be able to get it fixed, spray some anti-rust primer directly on the area.

Look for signs of rust: If you are concerned about rust, you want to go over every part of it to look for signs of rust. You should be aware; rust won't always appear as the rough, red discoloration you usually see. Therefore, you also want to look for rough patches of paint, this indicates you may have rust underneath the paint. Check all surfaces and use a mirror to check the underneath of the car.

Take care of the rust: It's best if you leave rust removal to a professional. However, if it is a very small area of rust and you feel like taking the job on yourself, then you will need to use 100-grit sandpaper. Slowly sand the rust off the surface, making sure to also sand the area directly next to the rust. Use a clean rag to remove dust and debris from the surface you have sanded.

Protect the area: Once you have sanded the area and wiped it down, you want to protect it so the rust doesn't return. You can do this by applying some anti-rust primer on the area. Tape off the parts of your vehicle you don't want the primer to get on and cover the ground with a sheet of plastic.

Apply the Primer: Carefully spray the primer on and wait a few minutes, then apply the second coat. If you are going to have your car painted by a professional, then you can stop at this point. It you are going to paint the area yourself, you can paint it once the primer is completely dry.

Keep in mind, taking your car in to an auto body repair shop is always the best way to go when it comes to removing rust. They have the knowledge and equipment to increase the odds of keeping the rust away for good. You can also check out sites like http://autobodyomaha.com for more info.